Routing issue 2910al

[switchstacking]

Hi ,

I have two 2910al switches configured Vlans . The problem now i have  is little bit confusing for me.

         I have vlans assigned in 10.4 range and the (building 1 ) main setup is in 192.16814.0/24 range so the point wr it is connecting to the main i created a vlan 99 ( 192.168.14.199/24) with one ip from the existing range. Building 1 is the place wr switch is situated right now and building 2 is little bit far form here so an isp in the middle.. Building 2 use different range 192.168.1.0/24 .

·         All  Devices Getting Ip from the DHCP
 
FROM Building1
Ø  Can devices  ping each other  =  YES
Ø  Can another devices in the building1 to ping in to vlan devices = YES
Ø  Can Vlan  devices to ping in to devices in the building1 = NO
Ø  Can devices ping the TMG Building1 (14.1) = YES
Ø  Can devices ping the TMG Building 2(0.23) = NO
FROM Building2
Ø  Can devices ping 14.199 = YES
Ø  Can devices ping 10.4.4.1 = NO

 Configuration of switch1 is attached . please help me with a solution i beliave it is a routing mistake in my configuration .

thanks,