Shutdown SVI Interface

[- Michael King -]

I'm relativitly new to the HP procurve line.  I have two 5406zl, setup to use VRRP to perform gateway redunancy.

I have need to to move the routing interface to a seperate device, in the same VLAN.

How do I shutdown the SVI on the primary router, but allow the VLAN to remain up?

On a cisco I would disable the interface VLAN, but the VLAN remains online.

Mike

[Peter_Debruyne]

Hi,

This was a long-time complaint on provision indeed.

They have added this in the K15.12 release for the 5400:

disable layer3 vlan xx

It will stop the routing, without removing the config. (like shutdown on the vlan interface for cisco/comware devices)

So you may need to update firmware first (and check if this is public/early code)

Best regards,Peter.