Some questions on Procurve 2510

[scampsd_Aricent]

Good afternoon,

I would like to know whether the following features are possible on Procurve 2510 switch:

Feature 1): Configure the switch so that when machine1 is not reachable (network), ALL traffic is automatically redirected to stand by machine machine2.

Feature 2): Configure the switch so that when machine1 is reachable but a defined port is closed, ALL traffic is automatically redirected to stand by machine machine2.

Thanks

Dominique

[Fredrik Lönnman]

OTOH no, you cannot do that. I wouldn't say that are regular features you find in a relatively simple L2 switch.