Update softvare ProCurve

[Vale0]

Hello,

we have not updated the software on J8992A HP 6200-24G-mGBIC yl Switch,

sh ver
Image stamp:    /ws/swbuildm/K_rel_galt_qaoff/code/build/btm(K_rel_galt_qaoff)
                Aug 31 2012 15:09:37
                K.15.08.0013
                1432
Boot Image:     Primary

https://h10145.www1.hp.com/downloads/SoftwareReleases.aspx?ProductNumber=J8992А on the site right now (K.15.18.0007),
I would like to clarify how we put the updates we need to be installed in stages by K.15.08.0014 (final K.15.08 version) to (K.15.18.0007) or just install the Current Releases K.15.18.0007.

[TerjeAFK]

In the release notes of each software release are listed the upgrade path, so take a look there. For K.15.18.0007 the following is listed:

If your software version is:              Your next step should be:

K.11.11 through K.12.29                     Update and reload into software version K.12.31 or K.12.62
(BootROM K.11.00 - K.11.03)

K.12.31 through K.13.55                    Update and reload into software version K.13.58 or K.13.68
(BootROM K.12.12 - K.12.14)

K.13.58 or newer                             Update directly into software version K.15.18.0007
(BootROM K.12.17 or newer;            (BootROM K.15.30)
use show flash command)