VLAN Translation on 2920-48G

[NetBlizzard]

Hi

Is it possible to translate a VLAN tag on a specific tagged Port to another VLAN tag with the proCurve 2920 switch?

If no, which switch has this capability?

Thank you for your Answer!

Cheers NetBlizzard

[Vince-Whirlwind]

The way I would bridge two VLANs would be to patch two untagged ports to each other, with each of the two facing ports configured with a different VLAN.

[NetBlizzard]

Yes, this was also my first idea.

But i would solve it on the switch device, without this "silly loop cable" :)

[Vince-Whirlwind]

QoS allows you to classify frames based on the 802.1q header and re-write 3 bits inside that header, but the bits involved are the ToS bits, not the VLAN ID bits.

I don't think you can do it.

[NetBlizzard · Accepted solution]

OK, thank you. 

Yes, the QoS bit is not the VLAN bit. :)

You know, is there a HP switch with VLAN Translation support?

Cheers