A6534A surestore FC_64

[marco and patrick]

Hi all,
i recently bought two A6534A surestore FC-64 switches .
Now it appears that the default passwords are changed and the supplier where i bought them from doesnt have them anymore.
Is there any way to set these back to default?
the default login is administrator , password is password.
no capitals.
i learned this from the user manual.
Can anyone help me with this one?
i need this login to connect to the web interface from this device.
thanks in advance,

Marco

[Steven E. Protter]

Shalom marco,

Most switches have a button you can hold down during boot that will totally bring them back to factory defaults.

If these servers are in production, you will need to pretty much shut them down and start over with the configuration.

Look on your documents for a procedure to set the switch back to factory defaults.

SEP

[marco and patrick]

Hi Steve,
thanks for your reply.
There are indeed two buttons,
one on each controller but i cant find any info on them.
Here is a link to the user manual:
http://www.hp.com/products1/storage/pdfs/san/AA-RS2FA-TE.pdf
I tried to hold these buttons down during startup but the password was not reset.
thanks for any help,

Marco