Brocade 3200 - No messages after power on

[Asghar Ghori]

Hi,

I have one 2400 and one 3200 brocade FC switches. I connected both of them to console but not able to see anything after booting them.

Please help.

[Koehnen-Wiesemes]

Hi Asghar,

for the console connection of an SW3200 you need to use the "special" serial cable from brocade, as far as I know, that is a serial
9pol.-DSUB cable with 1:1 connection between
line 2,3 and 6. Default parameters: 9600,8,1,N,None, login: Admin, password: password. The default switch IP is 10.77.77.77.

If the switch have any hw-problem, you might see orange LEDs blinking.

Rene