cisco MDS 9100 -- shutdown

[shashi kanth]

What is the right process to shutdown MDS 9100 through CLI (command line, telnet)?

Thanks.

[IBaltay]

Hi,
maybe this link could help you
http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/san-os/quick/guide/qcg_ins.html

[shashi kanth]

No information about how can i shutdown .

[IBaltay]

then at least hw shutdown has to be here:
http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/hw/9100series/installation/guide/overview.html

[IBaltay]

and here is the command reference book:
http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_1_x/1_2_2a/san-os/command/reference/9000CRP.html

[IBaltay]

but if you need the reboot of the whole switch, it can be done in the exec mode (this is the default cisco switch mode after your login) via the command reload
switch# reload and then yes
for other reload options see the
Command reference (link above) pls