Configuration help

[Mike Dang_1]

Hi,

In our lab we have a DL380 connects to a Fibre channel hub which connects to a modular router M2402. A tape library SSL2020 connects to the router M2402 to make up a SAN solution. I have been having problem with the router's configuration. Does anyone out there have any sample configuration/procedure on how to make all these devices work? At this time, the router couldn't recognize any other device. The user's manuals don't help either.

Thanks in advance,

Mike

[Christoph Najer]

Some modular data router are configured for manual configuration.
Connect serial to the mdr and set all the manual entries to automatic. You will see, that the User manuals is diffrent to the config of the MDR. Configure the MDR back to default.