HPE Community
HPE EVA Storage
1827439 Members
5788 Online
109965 Solutions
New Discussion

Re: configuring an MSA1000 from scratch

 
Paul_564
Occasional Advisor

‎10-23-2005 04:19 AM

‎10-23-2005 04:19 AM

configuring an MSA1000 from scratch

feel abit out of my league here so sorry if this is a bit of a no-brainer.
I need to configure an MSA from scratch (tell the MSA that there are disks there? , I can do the LSM configuration and adding them in there just not the setting up in the MSA.

Ive been plowing the hp website, but cant find any procedures for this or best practises if anyone can help or has a step by step procedure they could mail or point me too i would be eternally grateful.
I can add them to LSM
0 Kudos
3 REPLIES 3
Steven Clementi
Honored Contributor

‎10-23-2005 04:25 AM

‎10-23-2005 04:25 AM

Re: configuring an MSA1000 from scratch

Paul:

You can simply use the Array Configuration Utility toconfigure your MSA. You can also use the CLI through the serial port, but I prefer ACU.


You should be able to get a bootable CD image with ACU on it, if you don't have the Support CD. Pretty sure it is downloadable as well.


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
0 Kudos
Paul_564
Occasional Advisor

‎10-23-2005 04:39 AM

‎10-23-2005 04:39 AM

Re: configuring an MSA1000 from scratch

Thanks steven
how do i use the ACU this is not my area at all im afraid and ive been dropped in ?

Paul
0 Kudos
Paul_564
Occasional Advisor

‎10-23-2005 04:50 AM

‎10-23-2005 04:50 AM

Re: configuring an MSA1000 from scratch

/T
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.