Connecting to HDS 9960

[John Tyler]

I am trying to connect N-class running HP/UX 11.0 to a HDS 9960 (Not XP512) using Tachylite A5158A adapters in a fabric mode using brocade 2800 switch. I have created the zone on the switch using the WWN. The LUNS on the frame are starting from lun 0.
I have installed the patch PHKL_21834 and i running the driver version B.11.00.06.

fcsmutil /dev/td0 confirms driver state is online and Topology "PTTOPT_FABRIC".

Am i missing something? I did reboot the box and ioscan doesn't see the new disks.

Thanks in Advance.
ven

[Enes Dizdarevic]

Check that the device files for the newly attached device exist, and if not, run the 'insf' command to create them.

[Insu Kim]

To work in a fabric mode, you must know the minimum level of bundle patch that should be applied for the system.
Please refer to manuals accompanied with HDS9960.

Hope this helps,

[John Tyler]

Thanks to all you replied. It was a typo error in the zone configuration.

thanks again.