HPE Community
HPE EVA Storage
1824627 Members
4288 Online
109672 Solutions
New Discussion

Controllers Enclosure in Unmappable Hardware

 
Reserv1
Occasional Visitor

‎05-10-2013 06:14 AM - edited ‎05-10-2013 06:15 AM

‎05-10-2013 06:14 AM - edited ‎05-10-2013 06:15 AM

Controllers Enclosure in Unmappable Hardware

EVA 4000 2C2D after rebooting all devices all got to unmapped hardware. All servers have lost their Vdisks.

Enclosure ID(number) of all enclosures (disk and controller) set to 0. Disk enclosure number we changed by EMU  and they were normalized. But both controllers enclosures  have remained in unmapped hardware and enclosure ID = 0. 

Vdisks didn't appear.

The cache battery is broken in both controllers,  but the system was rebooting before and problems weren't...

 

Sorry for my English 

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎05-10-2013 06:23 AM

‎05-10-2013 06:23 AM

Re: Controllers Enclosure in Unmappable Hardware

With all batteries failed the array will NOT present any vdisk until the batteries get replaced.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.