Duplicate_Alis_Zone_in_Brocasde48K

[WW316110]

Can any one help to get my active Zine devices information. how to identify duplicate Zones and alis in Broacde 48K.

[Stephen Kebbell · Accepted solution]

You could try running a SAN-Health report from Brocade.

http://www.brocade.com/sanhealth

This utility logs onto your san switches and reads lots of information. Then it generates a file which you upload to Brocade. Within a day or so you get a zip file with an Excel-Sheet, a Visio Diagram and a file which can be read by SAN Health Professional. Either the Excel-File or SAN Health Professional can then tell you what zones a certain port/device is in.
The Excel-File can also show you "Hanging" zone/alias members (WWNs which are zoned but are no longer logged in to the fabric)

SAN Health Diagnostics and SAN Health Professional are both free.

Regards,
Stephen

[WW316110]

Thanks for your guidens i am reading the document.

[Steven Clementi]

You can also try the free HP utility that does similar work, but takes it a step further and shows you Storage Array and host information.


HP SAN Visibility:

" http://h18006.www1.hp.com/storage/networking/sansolutions.html "