1823916 Members
3058 Online
109667 Solutions
New Discussion

emc cx300

 
p.balamurugan
Advisor

emc cx300

I need some documentation how to create lun and how to access the created luns in linux.
1 REPLY 1
avamar
Occasional Advisor

Re: emc cx300

Hi
Well this is a HP Storage thread ,so it not proper to discuss about "how to " for emc products .
Still you can refer to documentation on
https://powerlink.emc.com .emc provides excellent documents ,besides a tool called Clariion Procedure generator ,which user friendly and help you in creating a document for you complete refrence .
You can download it from powerlink .

Well basic steps in creating LUNs and access them are as follows:

1:Create RAID group ;You can choose the type like RAID 1,3,5,10 and other parameters .(some rules like RAID 10 can have max 16 disk etc )
2:Create luns in RAId group .
3:Create Storage Group
4:Put Luns and the host server in storage group .
5:Rescan disk from host to check the luns are visible.

Well offcourse there are many things to take care of beside these steps .Refer to emc site for documents on Navisphere ,navicli etc .
And which version of Flare code does your array have .

Cheers
Avamar