(Emulex) 4Gb Loop Switches on EVA 8000

[Craig Howe_1]

Hi

Does anyone know how to access these as it mentions that there is a web gui available on them?

There is a com port and an ethernet cable, so wondering if anyone knows the default IP and Subnet Mask of these? I cant seem to find it registering a DHCP address.

Any info on them would be a great help

Thanks
Craig

[Luk Vandenbussche]

Craig,

the default ip is 10.77.77.77

You can configure it also on the com port with the cable of a brocade san switch

[Craig Howe_1]

Awesome thanks Luk I will try this and get back to the forum!

cheers

Craig

[Craig Howe_1]

Hi Luk

I tried using 10.77.77.77 and a crossover cable to config the switch. Also tried a brocade serial cable (8/N/1) but both didnt work.

Any ideas? Do you know where you got this information from - like a guide online or something?

thanks
Craig

[krusty]

FYI - These aren't Brocade switches, so the 10.77.77.77 isn't valid. I beleive they are for factory use only.

HTH,

Curt

[Craig Howe_1]

Hi

I did a packet trace on them and found it was using a 192.168.0.1 address. From there I went in an configured the loop switches

thanks for everyones comments.