Error Alert

[krsukuma]

Can any one pls help what is the steps to investiget the below alert. I received this laert from platform team.
Source.Storage Agents EventID.1216 Log.System Type.Error 1 of following events have been detected in the last 30 minutes. Computer . FRDKOCL09N2 Log . System EventID . 1216 Type . Error Source . Storage Agents DateTime . 01/10/2009 02.37.46 Drive Array Physical Drive Status Change. The physical drive in Slot 1. Port 1I Box 1 Bay 8 with serial number 3LC0DFZE00007652W62Z. has a new status of 3. Drive status values. 1-other. 2-ok. 3-failed. 4-predictiveFailure [SNMP TRAP. 3046 in CPQIDA.MIB] Message ID. SELUDSNIQPRO01.1063359 Script information link

[Víctor Cespón · Accepted solution]

Hi, that is indicating the failure of a SATA or SAS disk on that server.

It is on a controller on Slot 1, port 1 internal, bay 8.

[krsukuma]

but in storage side I cant see any failures?
Will it be in problem with server?

[Víctor Cespón]

Since the server has Windows, use ACU to check the status of the controllers and disks, or enter System Management Homepage.
Or run an ADU report and attach it here.

All these utilities are installed by default by the HP Proliant Support Pack.

[krsukuma]

the gui is in france language, I can run the command from CLI, can you pls give me the command.

[krsukuma]

GIve me 10 mins I got the logs I will attachh it

[krsukuma]

logs

[krsukuma]

Any luck

[Víctor Cespón]

Had some trouble downloading the file from the forum.
Now that I have the ADUReport.xml, I only see information about a Smart Array 5i in slot 0, with 2 x 72GB U320 10K disks.

Are yu sure this ADU was ran on the correct server?

[krsukuma]

5 mins pls took the report from wrong server, will send the right one now

[krsukuma]

Server log

[krsukuma]

Hi,

Any trace on error

[Víctor Cespón]

This one is the correct:

SLOT 1 Smart Array P400 Controller
Error occurred reading RIS copy from Port 1I, Box 1, Bay 8

Can't see the model of this disk but other disks on this server are:

DG036A8B53 = 376596-001 = Hot-Plug 36GB 10K rpm, SFF 2.5" Single-Port SAS hard drive

[krsukuma]

Can you please help how to troubleshoot this issue?

[krsukuma]

I see

SLOT SUMMARY:
Slot Num Slot Type Array Controllers and Host Adapters Detected
-------- --------- --------------------------------------------
SLOT 1 PCI-E Smart Array P400 Controller
SLOT 4 PCI PCI Based Fibre Channel Adapter
SLOT 5 PCI PCI Based Fibre Channel Adapter

SLOT 1 Smart Array P400 Controller ERROR REPORT:

Error occurred reading RIS copy from Port 1I, Box 1, Bay 8

Is anything I need to do from storage end to troubleshoot this

[Víctor Cespón]

Of course, replace disk 8 on that server.
As you can see it's connected to the SmartArray P400 controller.

The disk is failed, and we cannot see model, but it's probably a 36 GB like the others. Call someone that can verify that directly on the server.

[krsukuma]

ok, My doubt is on EVA I cannot see any disk failures. how you found the disk 8 is failed on it, and I beleive any disk failures will show on storage.
If this is not whether its a early warning for us.

[Víctor Cespón]

This is not on a EVA. The disk is SAS and it's connected to a Smart Array P400 on the server.

Dou you know what's the model of the server?
With a P400 and 8 SAS bays, could be a DL380 G5 or a ML370 G5 for example.

[krsukuma]

Thanks a lot. I have passed the issue to platform team. I was much wondering it was an storage issue. Let me wait and see if they come back to me.

I Appreciate your quick and correct guideness in this issue.

Cheers,
Krishnan