Error At EVA8000 (Diskgroup failed)

[shafeygad]

Dear

I found error today while i browsing EVA 1 from
Command viewer ( DiskGroup Failed)
-I notice that Vraid 0 Capacity 0 instead of 20TB

I attached log files and screen shot from errors that i found

Regards

[Uwe Zessin]

From the screen shots it looks like Disk Group 1 is in an intermediate state. At least one disk drive has failed or is inaccessible and maybe the failure message is because somebody created a virtual disk in VRAID-0.

You can try to reseat the disk drive and see if it comes back. If not, some deeper inspection and cleanup is required.

[Víctor Cespón]

It would be easier if you attached the Controller Event log.

Looks like a disk failed and some vdisks are in failed state.

Doy you have vdisks in VRAID 0?