EVA 6000 vdisk host access

[Xishan]

Hello...
Can somebody please guide me...i have presented a vDisk to Windows cluster (host) through commandview EVA...now on the host side...how do i access the vdisk...how do i add/map the vdisk from host side.
Thanx

[IBaltay]

Hi,
1. you can do the rescan of the disks via the Disk Manager. If the disks are not visible, then you need to restart the cluster nodes :-(. But before the restart it is a good opportunity to install the MPIO DSM driver 3.00.00 - the latest (multipathing driver).
2. After that you will see only 1 disk (without the MPIO you will see as many disks as many connections you have from the host to the EVA)
3. Initialize the disk and create the partition
4. define it in the MSCS cluster as a disk resource.