EVA4100

[ess]

hello all
i have 1 eva4100 and full(2c4d).i have one DL 380 g5 and operating system is win 2003EP edition sp1.
i add one space whit capacity 50gb and add to DL 380 g5.when to see disk manager i see 4 space 50gb.i don't use the MPIO Eva.
question:
when i copy 20gb in this space only one disk free space is 30gb and 3 space extant free space is 50gb.why?
tanks for best help.

[Patrick Terlisten]

Hello,

you NEED MPIO to manage the other paths. What you see is the same disks, but over the other three standby paths. What you observed is nothing to worry about. Windows doesn't check the free space on the standby paths.

I strongly recommend that you should install MPIO for the EVA. In case of a path failure you IO will drop. With MPIO a path failure can occur without losing data.

Best regards,
Patrick

[ess]

tanks for help
but if to install MPIO SURMOUNT this problom.
tanks.

[Patrick Terlisten]

Hello,

if you install MPIO you will see only one disk. The standby paths will be filtered by the MPIO device driver.

Best regards,
Patrick

[Wickedsunny]

Hi,

I am wondering why you have not installed the MPIO DSM at the first go. I hope that the 20 gig data which you are working with is just a test data.

Anyways, please get the MPIO for your EVA is at the following link:-

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=421492&swItem=co-71731-1&prodNameId=421494&swEnvOID=1005&swLang=13&taskId=135&mode=3

Please install this ASAP.

Regards,
Sunny

Rate solutions with points...

[Omar Hamdan]

as they said you should install mpio asap, there is no problem with what you are see
also put in mind that you need to restart the server after installing the mpio