EVA5000 firmware upgrade

[Robert Brothers]

I want to upgrade the firmware on our test bed EVA from 3.014 to 3.028 or 3.11. Can I go direct from 3.014 to 3.028 or is there a step in the middle?

[Hasan Atasoy]

yes

please look at thread


http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1229982987881+28353475&threadId=1113007


Hasan.

[Sheldon Smith]

And just a reminder: HP dropped support for 3.028 December 31, 2007. The latest version is 3.110.


Finally, don't forget to APPLY YOUR POINTS! You have assigned points to only 14 of 70+ answers

WHY SHOULD YOU DO THIS?
There are 3 reasons why rating replies is such an important feature:

1.) Others have taken time to help you, so please give them credit for their help.
2.) Your rating will help your peers earn points toward their Forums status, and you will validate the quality of the solution you've received.
3.) Other readers will understand which answer best solved a problem, enriching the community knowledge being shared.

Points should be applied to EVERY MESSAGE in the thread of ANY AND ALL of your questions that have "Unassigned" next to the date and time. Go to your profile, and click on the "Questions or topics with unassigned points" link. The button to apply points is on the bottom of each threadâ s page.

[IBaltay]

Hi,
a)
there are certain host OS specifics of the online firmware upgrade from the 3.014:
In general all major Unixes exept IBM AIX support it.
Windows OS server versions supported
Linux does not support the online firmware upgrade (only offline).

b)
but always upgrade should be done during off-peak loads

c) 3.028 extended engineering support was finished in march 2008

d)
3014 is far innactive version and should be upgraded to 3110 immediately