EVA6500 Firmware Upgrade

[Torsten.]

Sure you install something different to 0002.0000?

If you select the file, the message text in der window at the following screen will tell you the new version.

[PProcopi]

Yes i am sure. At the begining of the upgrade procedure the message is starting saying

For ver 10.1

Release Build: 0002.1000-CR0DAE
==============
Release Notes:
This firmware package will upgrade the management module to version 0002.1000,which includes HP P6000 Command View 10.1.
Before installing version 0002.1000, the HP P6000 Enterprise Virtual Array must first be running a minimum of version 09006000........

---------------------------------------------------------------------------------------------------------------------------------------------------

For ver 10.2

Release Build: 0002.2000-NR0E0B

==============
Release Notes:
This firmware package will upgrade the management module to version 0002.2000,which includes HP P6000 Command View 10.2.
Before installing version 0002.2000, the HP P6000 Enterprise Virtual Array must first be running a minimum of version 09006000........

-----------------------------------------------------------------------------------------------------------------------------------------------------

and when the management module restart and connect the version remain 0002.0000. I try the upgrede procedure several times, from 10.0 to 10.1, from 10.0 to 10.2, manual restart management module, try upgrade again, remove-reinsert manangement module, retry upgrade procedure, but at the end the version is still 0002.0000.

[PProcopi]

Finally i reploace Management Controller.