Help ASAP!!! Secure Path Manager Access

[Mark_575]

Hi,

I've installed Secure Path 4.0c and SP1 & SP2 with PSP 7.20.
I know there are problems with PSP 7.20 and SP, but this is incorporated in out build so I can't change it.

Where do I access the Management (SP Manager) from ?
Attached is what is see in the systems management home page

I need to roll this out ASAP, so any help would be useful.
Thanks

[Mark Poeschl_2]

Are you talking about the SP management CLI or the "real" SecurePath Manager? The CLI should be C:\Program Files\Compaq\SecurePath\SPMgr\spmgr.exe.

The "real" SecurePath Manager is a separate install and is typically NOT on the same server as is running SecurePath to access SAN disks. It's often installed on a SAN Management Appliance.

[Stephen Kebbell]

Hi Mark,

you can install SecurePath Manager on this system. As Mark Poeschl says, it's a completely separate install. And you need SP2 for SecurePath Manager, as well,
ftp://ftp.compaq.com/pub/products/sanworks/securepath/spwinv40csp2mgr.zip otherwise the link for SPM does not show up on the system management homepage (under Other Agents).

Regards,
Stephen

[Mark_575]

Thanks to both of you.
When I installed this last, there was a seperate management CD. This MSA1000 fit did not come with that management CD, so I found that link you showed above in the end and that resolved the problem.

Many Thanks

[Uwe Zessin]

The CD with Secure Path Manager comes with the Secure path package - it is not part of the MSA1000.