How find WWN and Checksum Eva4000/hsv200?

[rsa1]

I Have EVA4100 With HVS200-B Controller

I Do'nt Have WWN & Cheksum Numbers 

Pleas Help Me

S/N & P/N in The Image Send

Tankyou.

[giladzzz]

Hi

Try this

5000-1FE1-5006-8910         CS=60

regards

Give a KUDO if this helps

[rsa1]

Hi

Tankyou

wwn & cs is Ok

but This Massage is Displayed:

Storage System Name:

<No Storage System>

[giladzzz]

Hi

you must connect with command view and initilize the system

also you would need command view license ( you have 60 days trial)

Regards

Give A KUDO if this helps

[rsa1]

Hi

How To Downlaod command view Software

Tankyou

[giladzzz]

Hi

https://h20392.www2.hpe.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV10.3

Regards

Give a KUDO if this helps

[rsa1]

Hi

I Download HP P6000 Command view But Not Install In win7 X64 ,win 10 , win server 2008 And win server 2012.

Error Massage Image To Be Sent.

Tankyou.

[giladzzz]

Hi

it looks like you are installing command view patch

it should install on any windows 2008 and 2012

also your windows server must have an HBA in order to

see the EVA through fibre channel connection so

it can manage it.

Read the installation manual on the disk you downloaded

if it dosn't work try downloading and older version from HPE

https://h20392.www2.hpe.com/portal/swdepot/searchProducts.do

try version 9.4 

Regards

[rsa1]

Hi

Tankyou For Help Me

I Insert HBA Card & Connect Fiber To Controller But Not Install Command view.

Video & Log Be Send.

[rsa1]

Hi

Sorry, the software cammand view could not be installed.
Version 9.1 also failed to download and try.
If possible, send me the form of server and controller connections.

[Torsten.]

Try

https://h20392.www2.hpe.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV10.3

[rsa1]

Hi

Sorry
Unfortunately I still failed to install the HP P6000 Command View software.
I will send the controller profile to help me. Firmware & etc...
I tested versions 10.3.1 and 9.4.1 on Windows 7 and Windows 2008 and 2012, but failed.
I'm sorry to take your time.
What do you think is the solution?

[rsa1]

Hi

Sorry
Unfortunately I still failed to install the HP P6000 Command View software.
I will send the controller profile to help me. Firmware & etc...
I tested versions 10.3.1 and 9.4.1 on Windows 7 and Windows 2008 and 2012, but failed.
I'm sorry to take your time.
What do you think is the solution?

[rsa1]

Hi

Sorry
Unfortunately I still failed to install the HP P6000 Command View software.
I will send the controller profile to help me. Firmware & etc...
I tested versions 10.3.1 and 9.4.1 on Windows 7 and Windows 2008 and 2012, but failed.
I'm sorry to take your time.
What do you think is the solution?

[rsa1]

Hi

When installing the software, the error data is generated the log  after  is closed.
I will send the generated logs in a photo for you.

[Torsten.]

maybe your account is not an administrator.

[Gugum]

Hi,

we have same problem, I send image for my SN & PN

[Ivanenkov]

Hi, can you help me too

p/n and s/n in file