HPE EVA Storage
1748051 Members
5000 Online
108757 Solutions
New Discussion

HP EVA P6500 apparently false of occupancy alarm exceeded

 
RogerVI
Regular Advisor

HP EVA P6500 apparently false of occupancy alarm exceeded

I have an HP P6500 storage with 2 disk groups. One of this disk group is showing an alarm on the occupancy level.
This occurs after a shutdown of the storage.

In section Summary in disk Properties:

Total: 13969 GB
Allocated: 14385 GB (Critical alarm level exceeded)
Allocation level: Not available
Requested: 12322 GB
Oversubscribed: 0 GB


Although, the available space still says I have 1628 GB of vRAID, 813 GB of vRAID1, etc.  any ideas?



Thanks in advance

 

 

P.S. this thread has been moved from General to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator

Roger
1 REPLY 1
giladzzz
Honored Contributor

Re: HP EVA P6500 apparently false of occupancy alarm exceeded

Hi

If you are not using thin provisioning usually a controller Resync solves this problem.

You can do it from command view fieldservice page issue a 2a command do it in low traffic time though it usually is done with no downtime

Regards