1819922 Members
2319 Online
109607 Solutions
New Discussion юеВ

Re: HSZ80 uptime

 
Fredrik.eriksson
Valued Contributor

HSZ80 uptime

Hi,

Just want to ask a quick question about HSZ80 controller.

How do I check how long a HSZ80 controller has been online (uptime that is)?
I've figured this out a couple of months ago but now I can't seem to find it again.

Best regards
Fredrik Eriksson
5 REPLIES 5
Uwe Zessin
Honored Contributor

Re: HSZ80 uptime

If I recall correctly, it is shown in the upper left or right corner when you:
HSGZ> run vtdpy
.
Fredrik.eriksson
Valued Contributor

Re: HSZ80 uptime

Sadly, it didn't show.

HSZ80 S/N: ZG93106286 SW: V83Z-0 HW: E-04
Target 84.0% Idle 8767 KB/S 466 Rq/S
111111 P:1 Xfer Rate P:2 Xfer Rate Unit ASWC KB/S
0123456789012345 T W I Mhz T W I Mhz D0100 o^ a
P1DDDD hH 1 W 6 20.00 D0101 o^ a
o2DDDD hH W 7 20.00 D0200 x a
r3DDDD hH 3 W 6 20.00 D0201 x a
t4DDDD hH W 7 20.00 D0300 o^ a
5DDDD hH 4 W 6 20.00 D0301 o^ a 8
6DDDD hH W 7 20.00 D0302 o^ a
Pr Name Stk/Max Typ Sta CPU% 5 W 6 20.00 D0303 o^ a
0 NULL 0/ 0 Rn 84.0 W 7 20.00 D0400 o^ a
4 HP_MAIN 40/ 2 FNC Bl 14.0 D0401 o^ a 868
22 DS_1 40/ 3 FNC Bl 2.0 D0500 o^ a
D0501 o^ a

Best regards
Fredrik Eriksson
Rob Leadbeater
Honored Contributor

Re: HSZ80 uptime

Hi,

I have a feeling that it's somewhere in the output of "show this" although its been a while since I've had my hands on a HSZ80...

Cheers,

Rob
Fredrik.eriksson
Valued Contributor

Re: HSZ80 uptime

I thought so too, but my show this just shows current time.

HSZ80> show this
Controller:
HSZ80 ZG93106286 Software V83Z-0, Hardware E04
NODE_ID = 5000-1FE1-0002-5990
ALLOCATION_CLASS = 0
SCSI_VERSION = SCSI-2
Configured for dual-redundancy with ZG92503181
In dual-redundant configuration
Device Port SCSI address 7
Time: 09-FEB-2009 17:19:51
Host PORT_1:
SCSI target(s) (1, 2, 3, 4, 5)
Preferred target(s) (1, 3, 4, 5)
TRANSFER_RATE_REQUESTED = 20MHZ
Host Functionality Mode = A
Host PORT_2:
No SCSI targets
No preferred targets
TRANSFER_RATE_REQUESTED = 20MHZ
Command Console LUN is disabled
Cache:
64 megabyte write cache, version 0012
Cache is GOOD
Unflushed data in cache
CACHE_FLUSH_TIMER = DEFAULT (10 seconds)
Mirrored Cache:
64 megabyte write cache, version 0012
Cache is GOOD
Unflushed data in cache
Battery:
FULLY CHARGED
Expires: 11-SEP-2010
NOCACHE_UPS

Best regards
Fredrik Eriksson
Adam Garsha
Valued Contributor

Re: HSZ80 uptime

maybe "show this full"