HPE Community
HPE EVA Storage
1850735 Members
3110 Online
104055 Solutions
New Discussion

Re: Issue converting Command Devices using HP Auto LUN

 
Jeff Petrik
Occasional Advisor

‎04-30-2007 02:54 AM

‎04-30-2007 02:54 AM

Issue converting Command Devices using HP Auto LUN

Is there any way to convert the associated devices within a "Command Device" using the HP Auto-Lun Product? The only way we can think of to convert Raid-1 Command Devices to Raid-5 using the HP Auto LUN product is to physically remove the command devices, convert the devices, then re-create the Command Devices. It seems like the long was around, looking for some input on this one. Thanks, Jeff Petrik (USG Corp) Chicago, IL.
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎04-30-2007 03:28 AM

‎04-30-2007 03:28 AM

Re: Issue converting Command Devices using HP Auto LUN

Hi,

not really sure what is the problem.

Did you see this thread?

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1122289

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Jeff Petrik
Occasional Advisor

‎04-30-2007 04:26 AM

‎04-30-2007 04:26 AM

Re: Issue converting Command Devices using HP Auto LUN

Yes, my co-worker created it, I guess my question is if you have raid-1 command devices and wish to convert them to raid-5, is there a way to do this? We realize they are not LUNS but is there any way to convert the luns associated with the command device? Thanks, Jeff
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.