MSA1000 migrate unit problem

[Roberto Fabretti]

Hello

I have a BIG problem. I order to improve write performance on my MSA1000 I tried to migrate one unit raid_level from 5 to 1. Now it is has been stuck at 64% for ages.
The volume has enough space to accomodate it and I have backups in the worst case.

CLI> show unit 1

Unit 1:
In PDLA mode, Unit 1 is Lun 2; In VSA mode, Unit 1 is Lun 1.
Unit Identifier : 2
Device Identifier : 600805F3-000925C0-00000000-F6CF0009
Cache Status : Enabled
Max Boot Partition: Enabled
Volume Status : VOLUME EXPANDING (64% complete)
Mirror Init Status: 0% complete
6 Data Disk(s) used by lun 1:
Disk101: Box 1, Bay 01, (SCSI bus 0, SCSI id 0)
Disk102: Box 1, Bay 02, (SCSI bus 0, SCSI id 1)
Disk107: Box 1, Bay 07, (SCSI bus 0, SCSI id 8)
Disk108: Box 1, Bay 08, (SCSI bus 1, SCSI id 0)
Disk109: Box 1, Bay 09, (SCSI bus 1, SCSI id 1)
Disk114: Box 1, Bay 14, (SCSI bus 1, SCSI id 8)
Spare Disk(s) used by lun 1:
No spare drive is designated.
Logical Volume Raid Level: MIRROR FAULT TOLERANCE (Raid 1)
stripe_size=16kB
Logical Volume Capacity : 99,998MB