MSA1000 - Warnings 771 and 772 in HP ACU

[Dario Palermo]

How do I clear these warnings?

Sometimes I've seen them after an unexpected power loss or, like now, after disabling, removing and reinsertine one controller (tried this procedure to clear the 771 on that specific controller).

At this time I've got 771 on both controller and 772 on the controller I removed/reinserted.

This is driving me crazy...

Thanks

Bye

Dario Palermo

[Dario Palermo]

Event 772 disappeared, probably when the battery was fully charged.

771 still bothering me...

Bye

[Johan Guldmyr]

Hi!

If you hold some all the arrow buttons on the front of the MSA1000 you will clear the log.

See http://h30499.www3.hp.com/t5/Disk-Array/how-to-reset-MSA1000-alarms-from-panel/m-p/4248718#M28066

for more information.

I do not know how to clear it in the ACU but maybe the front panel is enough?

[Dario Palermo]

I would like to reset the warnings in the ACU. The idea is to monitor the health of the SAN with an external tool and I need to be able to set any event as repaired (or delete it) to prevent having persistent alarms by the monitoring tools.

I already deleted all the messages on the controllers but the 771 events are still present in the ACU.

Bye,

Dario Palermo