HPE Community
HPE EVA Storage
1827249 Members
2380 Online
109716 Solutions
New Discussion

MSA1500, Zone and SSP fails to update

 
Steve Pitt
Advisor

‎10-03-2006 09:37 AM

‎10-03-2006 09:37 AM

MSA1500, Zone and SSP fails to update

I am in the process of installing some more VMWare ESX servers into a working MSA1500 SAN, with a pair of 4/16 HP SAN switches.

While in the process of setting up I presented the HBA's on one server (x2) through to the MSA and they appeared in SSP as expected after configuring them in the SAN switches.

As I am still just in the set-up process and to verify what I was doing I then removed the new server from the zone(s) the SAN switches.

The problem I have is that the presentation on the SSP table in the MSA will not update (eg. the new server will not disapear), even after I have disabled the ports on both SAN switches.

Any suggections?
Steve "Bug-Man" Pitt
0 Kudos
Reply
1 REPLY 1
John Kufrovich
Honored Contributor

‎10-03-2006 10:08 AM

‎10-03-2006 10:08 AM

Re: MSA1500, Zone and SSP fails to update

Steve,
In SSP, rename your host connections to "Unknown" and set the host profile back to "Default". Click OK, then save.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.