HPE Community
HPE EVA Storage
1833770 Members
2083 Online
110063 Solutions
New Discussion

MSA2312fc Problem on RAID 10

 
Thaufik
Occasional Advisor

‎01-25-2011 11:52 PM

‎01-25-2011 11:52 PM

MSA2312fc Problem on RAID 10

What is the maximum disk to create a RAID 10?
Why when I configure RAID 10 on 8 disks, known only 4 disk RAID 10 and 4 disk others were identified as a spare?

there is a solution for this case?
Thanks & Peace

Thaufik Jonhar
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎01-26-2011 12:25 AM - last edited on ‎08-08-2011 12:22 PM by

‎01-26-2011 12:25 AM - last edited on ‎08-08-2011 12:22 PM by

Re: MSA2312fc Problem on RAID 10

Why not continue

http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/RAID-10-Configuration-on-MSA-2000-G3/m-p/4743901#M109154


I'm almost sure you did something wrong during the vdisk creation.

Delete the spares and add them to the vdisk.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.