New Disk in EVA4400 Showing Reduced Capacity

[Kav9]

Install 8 new 2TB FATA disks in an EVA4400. All firmware is up to date - Controllers, SAN Switches, Disks, Command View. 

Capacity should be 8 disks - 1 = 14TB capacity.

However, commandview is only should a capacity of 9,934GB.

Is this screenshot right for 8 x 2TB disks….??

P.S. This thread has been moved from General to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator

[Dennis Handly]

>Install 8 new 2TB FATA disks.  Capacity should be 8 disks - 1 = 14TB capacity.

I get: 8 * 2 marketing TB as 14.55 computer TB or 14,901 GB.

>commandview is only should a capacity of 9,934GB.

I'm not sure where that 9,934 comes from?

[Johan Guldmyr]

Disk drive protection == single.

This actually reserves the equivalent of two disks - 4TB in your case.