Overland library with FC

[Kenn Chen_1]

I have one overland lib that direct connect to our server SAN switch (specify zone).i can see some output form ioscan as below. But i can see the device file for the hardware. Any idea of how can i use this drive ? Thank you.

unknown -1 0/10/0/0.1.16.0.0.6.0 UNCLAIMED UNKNOWN OVERLANDNEO Series
ext_bus 7 0/10/0/0.1.16.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
target 27 0/10/0/0.1.16.255.0.0 tgt CLAIMED DEVICE
ctl 5 0/10/0/0.1.16.255.0.0.0 sctl CLAIMED DEVICE OVERLANDNEO VIA FCO
/dev/rscsi/c7t0d0
ext_bus 4 0/10/0/0.1.20.0.0 fcparray CLAIMED INTERFACE FCP Array Interface

[Michael Tully]

You probably need the 'schgr' driver added to your kernel.

[Kenn Chen_1]

i have activated the schgr but it seem nothing being changed.