QLOGIC 2340 HBA driver compatability with HP and EMC arrays

[Tony Leahy]

Hi,
I have a Win 2003 server with a QLOGIC 2340 HBA and trying to find a driver level compatable that will support both arrays. Currently using Driver Level 9.1.3.18

Has anyone hit this issue ?
Thanks

[IBaltay]

Hi,
according to EMC
Typical output of "servername"_QLOGIC_HBA.txt :- correct values in this example

QLogic Adapter 0 - QLA2340 WWPN: 21-00-00-E0-8B-10-xx-xx
-----------------------------------------------------------------------------
Connection Options : 2 - Loop Preferred, Otherwise Point-to-Point
Data Rate : Auto
Hard Loop ID : 0
Enable Hard Loop ID : Disabled
Loop Reset Delay (seconds) : 5
Frame Size : 2048
Enable FC Tape Support : Enabled
Operation Mode : 0 - Interrupt for every I/O completion
Interrupt Delay Timer (100ms): 0
Execution Throttle : 256
Enable Extended Logging : Disabled
Login Retry Count : 8
Enable Lip Reset : Disabled
Port Down Retry Count : 45
Enable Lip Full Login : Enabled
Link Down Timeout (seconds) : 45
Enable Target Reset : Enabled
Max LUN Per Target : 256
-----------------------------------------------------------------------------
Host : REDMOND-C2
Adapter Number : 0
Adapter Model : QLA2340
Adapter Node Name : 20-00-00-E0-8B-10-xx-xx
Adapter Port Name : 21-00-00-E0-8B-10-xx-xx
Adapter Port ID : 00-00-00
Serial Number : Kxxxxx
Driver Version : SCSIport 9.0.4.10 (w32 IP) or STOR Miniport 9.1.4.15
BIOS Version : 1.47
Firmware Version : 3.03.06
Device Target Count : 0
PCI Bus Number : 1
PCI Slot Number : 4
PortType (Topology) : NPort
Adapter Status : Loop down

http://knowledgebase.emc.com/emcice/documentDisplay.do;jsessionid=B4414BF0584A973C40A06F4AA2D59AF1?docType=1006&clusterName=DefaultCluster&resultType=5002&groupId=1&page=&docProp=$solution_id&docPropValue=emc110898&passedTitle=null

http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/OEM_Product_List.aspx?oemid=65


According to the HP the latest supported for the FCA2214/QLA 2340 is Storport 9.1.3.18 (in the qlogic documentation -> Windows 2003 IA32 STORport Driver 9.1.0.18 IA32 STORport driver for use with HP MSA, VA, XP, EVA and HSG) with the MS hotfix KB932755 or later, BIOS 1.45 (same in the qlogic documentation)

http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/Product_detail.aspx?oemid=21

[Tony Leahy]

Hi,
thanks for that though I was looking for a driver level that was compatable ? The HP array is an EVA8000 and the EMC array is a DMX-3

sorry , did u find something that would help me here because one of your links didn't work

T

[IBaltay]

Hi,
unfortunately not :-),
to resume it briefly:
according to the HP/Qlogic info the latest BIOS is 1.45 and Storport Miniport is 9.1.3.18

according to the EMC/Qlogic info the latest
BIOS is 1.47 and Storport Miniport is 9.1.4.15.

But do you have DMX-3 and EVA8000 LUNs on 1 host via 1 or 2 redundant HBAs?

[Tony Leahy]

Hi,

I have the them on 2 redundant HBA's

Tony

[IBaltay]

Hi,
there is a change in the current HP compat list for the 2340:
according to the HP/Qlogic info the latest BIOS is 1.45 and the latest Storport Miniport is 9.1.7.17 and (9.1.3.18 is still supported):
I guess to ask the Qlogic to clear the compatibility of both storport miniport driver versions and to suggest which should be used in your configuration