"Volume is Missing" EVA 4k SAN

[SUBHAJIT KHANBARMAN_1]

I forgot to mention that the EVA is running on old firmware means inactive firmware. Please update it to latest firmware(XCS6.240).

Please find the advisory,
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c02747476&jumpid=reg_R1002_USEN

and check for "EVA XCS support matrix"

[Brett Barton]

Thanks for taking a look. Would it be worth doing a "refresh" on the cell before removing and re-adding the drives?

[SUBHAJIT KHANBARMAN_1]

Oh I thought you have already done that.

Please go ahead and restart the CV EVA service and check.

At the same time suggest you to re-seat the suspected drives within 10 seconds each one and one by one.

After that share the log again.

[Johan Guldmyr]

You have 60 seconds per drive, but have it out at least 10 seconds before putting it back in (to let it spin down).

After each drive I would suggest that you check command view to make sure everything is OK(so wait a minute or 10, up to you ;) before proceeding to the next.