RA4100 Trouble

[Lyndon Frei]

Hi,

I got some problems with my RA4100 SAN solution.

There are six ML370G2 Servers in my SAN environment. Each of them are equiped with two 64Bit/66MHz HBAs redudantly connected to two StorageWorks SAN Switch 2/16 which in turn are again connected to four RA4100 enclosures.

Redudancy/Failover is handled by SecurePath3.1a SP1.
There are several Volumes defined on the RAs and designated to the servers using ssp.

Actually everything is working fine now. The thing that disturbs uss is that we cannot connect another RA to the environment.
The system management Agents/Homepage lists the new array, but it won't show up in ACU for configuring...

Has anybody got me clue?
Is there maybe limit of connectable RAs?

[Marino Meloni_1]

XE version of ACU do not support RA,

use thisone:

http://h18007.www1.hp.com/support/files/storage/us/download/14185.html

marino

[Lyndon Frei]

Hi Marino

Thanks for the quick reply...

But I guess I should have mentioned that I can configure my existing RA4100 with ACU versions 2.90 and 7.0

So there gotta be something else I've overseen...