HPE Community
HPE EVA Storage
1824952 Members
3499 Online
109678 Solutions
New Discussion

Re: Redundancy failed in ACU for MSA controller

 
gkubat
New Member

‎02-27-2007 06:52 AM

‎02-27-2007 06:52 AM

Redundancy failed in ACU for MSA controller

I have an MSA1000 with 2 fabric switches and controllers. In the ACU I am seeing the "Redundant Path Failed" Firmware is at 4.48. There are 2 dl580 G2 servers attached to the array. I have attached a text document with the results from the following command:
spmgr display

I am not certain where to go next. I am unable to move the group but if I take the server which is in control of the array down and pause it the other server will take over. Any help is appreciated
0 Kudos
Reply
1 REPLY 1
gkubat
New Member

‎02-27-2007 06:57 AM

‎02-27-2007 06:57 AM

Re: Redundancy failed in ACU for MSA controller

I forgot to add that we are using Secure Path 4.0c SP2
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.