RSM launch command question

[Gene Kenny]

I am trying to use the launch command in RSM 2.0. I am trying something simple like starting wordpad.exe. MY RSM script is very simple Launch ( "blp20g2_b2", "c:\word.bat", "", NOWAIT, "" ). On the RSM side everything looks ok but on the host wordpad never starts. I have tested the credentials and that seems fine.

Any thoughts appreciated

Gene

[Ivan Ferreira · Accepted solution]

Can you try with a "non GUI application" like a simple bat like this:

test.bat
echo "hello world" > c:\temp\hello.txt


Identify if the hello.txt is created.

[Gene Kenny]

Thanks that works, how would I use the launch comamnd to start and stop exchange as an example?

[Orrin]

Hi Gene,

You have to set your default display.

Regards,
Orrin

[Gene Kenny]

Thanks for the tip. I have tried
Set display=0 & set display=1
Pssuspend taskmgr

Sorry for the ignorance but how should I set the display