running ibm's sdd on hpux

[VWR Admin]

we're installed sdd on our v2500 11.0 hp system and are having problems converting LVM to use the vpaths. Error message "vgextend: Couldn't open physical volume /dev/rdsk/vpathxx I/O error". Does anyone know of any hpux pathces related to using sdd? Thanks,

[Srinivas_35]

Make sure that you can see IBM disks by running the following:

ioscan -fnC disk
insf -e
ioscan -fnC disk |grep IBM

If you can see then you need to check for dependent patches for SDD. Look in the README file or HPUX-INSTALL file.

[Srinivas_35]

If you are running HP-UX 11.0 with 32 bit and 64 bit, see the following dependent patches.

32-bit:

PHKL_20674, PHKL_20915, PHKL_21834, PHKL_22759, PHKL_23001, PHKL_23406,
PHCO_29436

32bit or 64bit:

PHKL_21392, PHKL_21624, PHKL_21989

only for 64-bit:

PHKL_21381.

you need above patches if you are running 32 bit or 64bit

To see 32 or 64bit on your system, use

getconf KERNEL_BITS

[Brian T. Borders_1]

Are you still having problems ?
I just finished an install on an N-Class with HP-UC 11.00