Secure Path 3.0B HP-UX 11i with BC v 2.3

[Yermek Bissenbayev]

Dear All,

Please, help with the decision of a problem HP-UX 11i with Secure Patch 3.0B.
See logs bellow:
part0:/sbin#fcmsutil /dev/td0

Vendor ID is = 0x00103c
Device ID is = 0x001029
XL2 Chip Revision No is = 2.3
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x00128c
Topology = PTTOPT_FABRIC
Link Speed = 2Gb
Local N_Port_id is = 0x020900
N_Port Node World Wide Name = 0x50060b000025c791
N_Port Port World Wide Name = 0x50060b000025c790
Driver state = ONLINE
Hardware Path is = 0/0/2/1/0
Number of Assisted IOs = 6160
Number of Active Login Sessions = 0
Dino Present on Card = NO
Maximum Frame Size = 2048
Driver Version = @(#) PATCH_11.11: libtd.a : Dec 12 2003, 14:34:15, PHSS_28509

part0:/sbin#fcmsutil /dev/td1

Vendor ID is = 0x00103c
Device ID is = 0x001029
XL2 Chip Revision No is = 2.3
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x00128c
Topology = PTTOPT_FABRIC
Link Speed = 2Gb
Local N_Port_id is = 0x020900
N_Port Node World Wide Name = 0x50060b000025c7db
N_Port Port World Wide Name = 0x50060b000025c7da
Driver state = ONLINE
Hardware Path is = 0/0/10/1/0
Number of Assisted IOs = 6295
Number of Active Login Sessions = 0
Dino Present on Card = NO
Maximum Frame Size = 2048
Driver Version = @(#) PATCH_11.11: libtd.a : Dec 12 2003, 14:34:15, PHSS_28509

part0:/sbin#ioscan -fnk
.
.
.
ctl 70 0/0/10/1/0.2.11.0.0.0.0 sctl CLAIMED DEVICE COMPAQ HSV110 (C)COMPAQ
/dev/rscsi/c33t0d0
disk 276 0/0/10/1/0.2.11.0.0.0.1 sdisk CLAIMED DEVICE COMPAQ HSV110 (C)COMPAQ
/dev/dsk/c33t0d1 /dev/rdsk/c33t0d1
disk 283 0/0/10/1/0.2.11.0.0.0.2 sdisk CLAIMED DEVICE COMPAQ HSV110 (C)COMPAQ
/dev/dsk/c33t0d2 /dev/rdsk/c33t0d2

part0:/sbin#ps -ef | grep spagent
root 1356 1 0 12:14:37 ? 0:00 spagent
root 6922 2028 1 13:34:53 pts/0 0:00 grep spagent

And here it is a problem
part0:/sbin#spmgr display
Server: part0 Report Created: Sat, Dec 04 13:34:16 2004
Command: spmgr display

At attempt to add LUN (spmgr add WWNN) the same mistake is given out.

Have seen all guide, could not find the answer.
On all visibilities for the same reason does not work and РС ( see attached file

[Yermek Bissenbayev]

I am sorry for not accuracy, here a problem.

part0:/sbin#spmgr display
Server: part0 Report Created: Sat, Dec 04 13:34:16 2004
Command: spmgr display
No LUNs have been presented to Secure Path.

part0:/sbin#spmgr display -av td0
Server: part0 Report Created: Sat, Dec 04 13:34:31 2004
Command: spmgr display -av td0
No LUNs have been presented to Secure Path.
-------

At attempt to add LUN (spmgr add WWNN) the same mistake is given out.

[Yermek Bissenbayev]

Probably a problem in here:
I Have Secure Path v.3.0D (P/N T3550A) + EVA 5000 VCS v 3.020.
In Quick Specs Secure Path v 3.0E It is told:

" Storage Controller Software ...
EVA5000, EVA3000 solutions: Supports VCS v2.0, v3.0, v3.01

Probably Secure Path does not work with this version VCS?

[Pruthviraj HP]

Hi,

Have you installed all patches mandated by the Secure Path release notes?
Also please make sure that you use the "install.sh" provided with the distribution to install SecurePath, not the swinstall.

In any case as some of the problems/bugs in 3.0B release have been rectified, move to the latest releases 3.0D or 3.0E.

Regards,