Secure path Error and configuration

[Srinivasan_8]

Hi.
I have a problem in using the secure path after configuring the cluster, Create a profile, after creating and logging in it says " Currently no information is avialable from any host on storage system 0". I have just setup an stand alone server with windows 2k Advance server and service pack 3 and configured MSA 1000 using ACU. i am able to see the disk created using the ACU in the OS.
If there a solve to resolve this issue.

[Peter Lindblom · Accepted solution]

How and from were did you install the CPQKGPSA drivers?

Please see the update i have put in the below message. This maybe will help you.
http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x13a54a988422d711abdc0090277a778c,00.html

Regards,

Peter

[Srinivasan_8]

After Updating the driver for PCI- HBA Fibre Channel still unable to see the storage through secure path manager. From operating system I am able see the disk array. What could be the problem.

[Matthew Williams_1]

What version of secure path are you running ?.

What Firmware revison is currently running on your MSA1000 ?

FYI there have been issues with Service Pack 3 & securepath in general.

[Srinivasan_8]

What version of secure path are you running ?. - 3.1B

What Firmware revison is currently running on your MSA1000 ? - 2.38

FYI there have been issues with Service Pack 3 & securepath in general.

Still the problem is persisting.

[Forum User_1]

2.38 requires SecurePath v4.0

[ML Chin]

There is an issue with using Win2K SP3 and SecurePath and MSA1000. Please see the Customer Advisory (link below) for further information.

http://wwss1pro.compaq.com/support/reference_library/viewdocument.asp?countrycode=1000&prodid=117&source=OI021115_CW01.xml&dt=3&docid=13122

For the MSA1000, this problem has been fixed, however, I'm still waiting for the RA4100 fix (I'm facing this issue myself). The Advisory will have all the "version number" information that you require to run your configuration successfully.

Regards.

[Srinivasan_8]

ML CHIN

I have done as per the Customer Advisory. But another message is poping up "securepath installed in host is not an API version 7/6/5 compatabile". Please advise.

Thanks/Rgds
Srini

[Srinivasan_8]

ML CHIN

I have done as per the Customer Advisory : OI021115_CW01 . But another message is poping up "securepath installed in host is not an API version 7/6/5 compatabile". Please advise.

Thanks/Rgds
Srini

[Mark Taylor_5]

I have also installed this software on my new DL 380 cluster using the MSA 1000 and I am receiving the API error evening after upgrading to SPM ver 4.0a.

Please advise on the resolution to this.

[Shaun Bull]

The error "securepath installed in host is not an API version 7/6/5 compatabile" occurs because you are trying to lanch securepath v4 via the Secure path manager that was used by Ver 3. securepath 4 uses a broswer interface and you must have java loaded on the machine that uyou are using for SP access.
On you browser type http:\\localhost:2301

Hopefully this will help.

Shaun