secure path

[rudy_4]

spmgr display
Server: PHOENIXI Report Created: Fri, Mar 18 17:25:20 2005
Command: spmgr display
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Storage: 5000-1FE1-5000-F9C0
Load Balance: Off Auto-restore: Off
Path Verify: On Verify Interval: 30

All devices on this Storage System are deleted.


and the disks went missing i check /var/adm
and i dound this



messages:Mar 13 23:17:36 PHOENIXI mpxio: [ID 497178 kern.info] /scsi_vhci (scsi_vhci0) multipath capabilities are disabled through driver configuration file.
messages.0:Mar 12 18:37:13 PHOENIXI mpxio: [ID 497178 kern.info] /scsi_vhci (scsi_vhci0) multipath capabilities are disabled through driver configuration file.
messages.1:Mar 3 18:24:05 PHOENIXI path: [ID 842509 kern.info] CPQswsp: Path hsx-1206-35-1 Failed (LUN 600508B40001035D0001B00000AF0000 Controller P5849D3AAOF038 Array 50001FE15000F9C0 HBA qla2300-1)
messages.1:Mar 3 18:24:05 PHOENIXI path: [ID 842509 kern.info] CPQswsp: Availability for LUN 600508B40001035D0001B00000AF0000 changed to Reduced
messages.1:Mar 3 18:24:05 PHOENIXI path: [ID 842509 kern.info] CPQswsp: Path hsx-0-34-1 Failed (LUN 600508B40001035D0001B00000AF0000 Controller P5849D3AAOF038 Array 50001FE15000F9C0 HBA qla2300-0)
messages.1:Mar 3 18:24:05 PHOENIXI path: [ID 360269 kern.warning] WARNING: CPQswsp: All paths for Target/LUN 0/0 (WWID=600508B40001035D0001B00000AF0000) on Controller P5849D3AAOF038 failed
messages.1:Mar 3 18:24:05 PHOENIXI path: [ID 842509 kern.info] CPQswsp: Availability for LUN 600508B40001035D0001B00000AF0000 changed to Critical
messages.1:Mar 3 18:24:05 PHOENIXI path: [ID 842509 kern.info] CPQswsp: Path hsx-1407-32-1 Failed (LUN 600508B40001035D0001B00000AF0000 Controller P5849D3AAOF004 Array 50001FE15000F9C0 HBA qla2300-1)
messages.1:Mar 3 18:24:05 PHOENIXI path: [ID 842509 kern.info] CPQswsp: Path hsx-201-33-1 Failed (LUN 600508B40001035D0001B00000AF0000 Controller P5849D3AAOF004 Array 50001FE15000F9C0 HBA qla2300-0)
messages.1:Mar 3 18:24:05 PHOENIXI path: [ID 360269 kern.warning] WARNING: CPQswsp: Availability for LUN 600508B40001035D0001B00000AF0000 changed to Dead
messages.1:Mar 3 18:29:35 PHOENIXI path: [ID 842509 kern.info] CPQswsp: Availability for LUN 600508B40001035D0001B00000AF0000 changed to Critical
messages.1:Mar 3 18:29:35 PHOENIXI path: [ID 842509 kern.info] CPQswsp: Availability for LUN 600508B40001035D0001B00000AF0000 changed to Reduced
messages.1:Mar 3 18:29:35 PHOENIXI path: [ID 842509 kern.info] CPQswsp: Availability for LUN 600508B40001035D0001B00000AF0000 changed to Alive
messages.1:Mar 3 18:31:17 PHOENIXI mpxio: [ID 497178 kern.info] /scsi_vhci (scsi_vhci0) multipath capabilities are disabled through driver configuration file.
messages.1:Mar 3 21:31:10 PHOENIXI mpxio: [ID 497178 kern.info] /scsi_vhci (scsi_vhci0) multipath capabilities are disabled through driver configuration file.
messages.2:Feb 23 18:11:19 PHOENIXI vxdmp: [ID 997040 kern.notice] NOTICE: vxvm:vxdmp: disabled path 32/0x2c0 belonging to the dmpnode 258/0x40
messages.2:Feb 23 18:11:25 PHOENIXI vxdmp: [ID 997040 kern.notice] NOTICE: vxvm:vxdmp: disabled path 32/0x2d0 belonging to the dmpnode 258/0x50
messages.2:Feb 23 18:11:26 PHOENIXI vxdmp: [ID 997040 kern.notice] NOTICE: vxvm:vxdmp: disabled path 32/0x2c8 belonging to the dmpnode 258/0x48
messages.2:Feb 23 18:15:53 PHOENIXI vxdmp: [ID 912507 kern.notice] NOTICE: vxvm:vxdmp: enabled path 32/0x2c0 belonging to the dmpnode 258/0x40
messages.2:Feb 23 18:15:53 PHOENIXI vxdmp: [ID 912507 kern.notice] NOTICE: vxvm:vxdmp: enabled path 32/0x2c8 belonging to the dmpnode 258/0x48
messages.2:Feb 23 18:15:53 PHOENIXI vxdmp: [ID 912507 kern.notice] NOTICE: vxvm:vxdmp: enabled path 32/0x2d0 belonging to the dmpnode 258/0x50


thanks in advanced

[Vincent Fleming]

It looks like something happened at Mar 3 18:24:05 that took the controllers offline.

It was restored Mar 3 18:29:35.

My guess would be a controller reboot...

A few suggestions for you:
1. make sure you're using the most current firmware on the controllers
2. Turn on the AutoRestore on the SecurePath.
3. if it happens again, call for support - this sounds like it could be a hardware problem.

Good luck,

Vince