secure paths on netware 6

[terry rose_1]

what is correct way to install secure paths on netware

all i did was insert cd and install through nwconfig
this loads cpqspahw and cpqspagt

we had a contractor install originally and i remember installing from a windows box and then running hsg80cfg and this loaded steam.nlm

when i install via nwconfig - i have no steam - is this a prob

what is correct method
what is steam.nlm - do i need it and if so where did it come from
???

[Doug de Werd]

not sure if this will help, but you might want to check these out:

This is the steam agent download
http://h18004.www1.hp.com/products/storageworks/softwaredrivers/swcc/steamagent.html

The steam agent allows you to monitor the storage system through StorageWorks Command Console (SWCC). If you're not using SWCC, it's no big deal.

this is the SWCC User guide
http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_aa-rfa2j-te/TPM_aa-rfa2j-te.pdf

this is the ACS guide for Netware (see chapter 4)
http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_aa-rfb9f-te/TPM_aa-rfb9f-te.pdf


here are some others:

ftp://ftp.compaq.com/pub/products/storageworks/techdoc/raidstorage/AA-RFB7B-TE.pdf

http://h200005.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_aa-rn72c-te_rev1_us/TPM_aa-rn72c-te_rev1_us.pdf

http://h200005.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_av-rtnvb-te/TPM_av-rtnvb-te.pdf

http://h200005.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_aa-rn73e-te/TPM_aa-rn73e-te.pdf

Thanks,
Doug