HPE Community
HPE EVA Storage
1826654 Members
2380 Online
109695 Solutions
New Discussion

Re: StorageWorks P2000 G3

 
danieleb
New Member

‎02-24-2011 08:20 AM

‎02-24-2011 08:20 AM

StorageWorks P2000 G3

Hi all, i'm next to buy a P200G3 with 2 iscsi controller (8 x 1Gb iscsi), 2 DL380G7 and 2 procurve 2910 switch to set a HA infrastructure. Is possibile to match SAN iscsi ports togheter to enhance througthput? I mean, 1Gb between server and san to set up a DB storage could be poor imho.
Does anyone knows cache size of P2000 iscsi controllers?
TIA,
Daniele.
0 Kudos
Reply
1 REPLY 1
Steven Clementi
Honored Contributor

‎02-24-2011 09:37 AM

‎02-24-2011 09:37 AM

Re: StorageWorks P2000 G3

I don't recall there being any options to bond iSCSI ports on the MSA in the web interface.

I could be wrong, I have not set up iSCSI on the ones I've installed. From what I remember, there were only network setting fields that were settable, but Idid not dig deep.

On the other hand, with 8 ports... you can do lots of load balancing and/or multipath.

As for poor performance... it depends on how utilized the databse server(s) are going to be.


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.