HPE VM Essentials installation - Network Configuration "Error"

[staffsmatt]

Hi,

I am just trying to install HPE Morpheus VM Essentials for evaluation purposes. I am following this guide:

https://support.hpe.com/hpesc/public/docDisplay?docId=sd00006472en_us&page=GUID-B96D6475-9834-4E0F-A08B-CB97F532B786.html

I have installed the product ok but when I go into NEtwork COnfiguration I get a small popup with the word "Error" on it and nothing else.

This is a development (physical server) with one ethernet port connected (no vlans or bonds set up just a standard ethernet card) - the card is working as I can access the server over SSH.

I probably should also say that I am by no means a linux expert, very much at the "Google what you want to do and change the command to suit" stage.

Thanks

Matt

[PeterTzvetanov]

Hi  staffsmatt,

send a mail to hpe-sw-trial-vmessentials@hpe.com and we will have a look together.

Peter Tzvetanov

Support Engineer

Peter.Tzvetanov@hpe.com

Technical Support Phone Numbers

HPE Operations

You can manage your cases on HPE Support Center

[staffsmatt]

Thanks, I've sent that in.