Alert threshold for Nimble Storage

[A97]

Hi Dears,

I need help to create theshold for Nimble storage cpacity when the capacity reaching 90% will send an email to 3 client and inform them about the status of the curent stotrage capacity.

I tried to configure email, smtp, ip address and authentication but u need help in alert threshold.

thank in advance.

[NCG1]

Hi A97,

Hope you are doing good.

Do you mean, you need email alerts to be sent to 3 email IDs when the array storage capacity reaches 90%?

Regards,

Naveen Chandru G 

[A97]

Hi NCH1,

Yes, I mean 3 email addresses will recive an email about capacity status when it reaching 90%.

[NCG1]

Hi A97,

Yes, all the 3 email addresses will receive email alert about the capacity.

Please login to the array > Administration > Alerts and Monitoring > Email.

In the Send to section, please add all the 3 email IDs one by one and click on save. Perform a test to check and confirm if the alerts are being received or not.

Whatever alerts are there for the array, they will sent to the email addresses mentioned in this field.

Please let me know if this helps or not.

Regards,

Naveen Chandru G 

[NCG1]

Hi A97,

Good day!

Please let me know if you need any assistance in setting up the alerts for the 3 email IDs. 

Regards,

Naveen Chandru G 

[NCG1]

Hi A97,

Good day!

As there was no response from your end, I'll go ahead and close this case. Please reach out to our support team if you need any assistance. 

Regards,

Naveen Chandru G 

[NCG1]

PFA

[A97]

@NCG1 

Hi NCG1,

Sorry for delaying replay,

kindly find the logs created when i trying to send a test email.

smtp server and port are already allowed from network side.

[NCG1]

Hi A97,

Can you please check the below firewall settings and confirm if everything is in place? Precisely, Storage array alerts and Storage array statistics.

If everything in place, we can get into a call to check. 

Create firewall Rules

Use this information to configure local ports for incoming and outgoing HTTP, HTTPS, iSCSI, SCP, SNMP, SRM, SSH, TCP, and other data and management protocols.

Port Number

Service

Protocol

Destination DNS/IP

443 TCP

DNA, heartbeat

HTTPS

nsdiag.nimblestorage.com

443 TCP

Storage array alerts *

HTTPS

nsalerts.nimblestorage.com

443 TCP

Storage array statistics

HTTPS

nsstats.nimblestorage.com

443 TCP

Software downloads

HTTPS

update.nimblestorage.com

443 TCP

Storage array initialization

HTTPS

device.cloud.hpe.com

443 TCP

Storage array initialization

HTTPS

common.cloud.hpe.com

443 TCP

Data Services Cloud Console

HTTPS

console-instance.data.cloud.hpe.com

tunnel-instance.data.cloud.hpe.com

instance.data.cloud.hpe.com

Where instance can be eu1 for Europe, jp1 for Japan, uk1 for United Kingdom or us1 for America. For example:

console-us1.data.cloud.hpe.com

tunnel-us1.data.cloud.hpe.com

us1.data.cloud.hpe.com

data.cloud.hpe.com

2222 TCP

Secure tunnel

SSH

hogan.nimblestorage.com

NOTE: The array may initiate connections to these external addresses from the Management and Data IP addresses or any controller support IP address.

NOTE: When configuring firewall rules for the destinations listed above, it is recommended that you specify the destination by host name rather than by IP address, and allow DNS to resolve the IP address. In the event that there is a change in the publicly available IP address for one of these destinations, the change will be communicated by a notification on the InfoSight portal. Other methods of sending notifications of such changes may be chosen as needed.

Regards,

Naveen Chandru G