Failed to add enclouer

[FelipeRuiz]

I deleted the oneview because it failed and it had no backup, I deployed a new oneview but when I add an enclouser it tells me to delete it from the previous oneview that I do not have access to,

Unable to add enclosure: 

The enclosure is being managed by another OneView management system

To monitor this enclosure it must be removed from the other management system

[Suvamay]

1. The management URL might still point to the appliance. If so, it must be reset to point at the first interconnect in the enclosure. To fix this, use the following ssh commands to go into the Onboard Administrator (using administrator credentials) and change the management URL to point to the first active VC interconnect's IP address. restart oa, where N is the bay number of the active. This causes the OA to obtain the management URL from the first VC interconnect.
2. The interconnects might still be claimed by the appliance. If this is the case, you have to remove the interconnects manually.

[Suvamay]

Are you able to add.

[FelipeRuiz]

@Suvamay 

Hi good day, I try to apply your recommendation restart both OA and still cant add de enclosure.

[Suvamay]

You need to remove and reseat the OA along woth OA tray.