GEN 10 2025.01 SPP import does not work.

[Mr_S1]

Hello

I am trying to import the GEN10 2025.01 SPP into OneView, but I always get the following error.

Issue Unable to validate the signature for the following components contained with the firmware baseline bp-Convenience-download-2025_01-00_00-67925ecd41cf03bf2b1c8c14.iso. The component does not have a valid HPE signature.
Online ROM Flash Component for Linux - HPE Integrated Lights-Out 5

I have tried the SPP without Pensando and with Pensando and get the same error with both.
File name:
P81139_001_gen10spp-2025.01.00.00-SPP2025010000.2025_0119.14.iso
bp-Convenience-download-2025.01-00.00-67925ecd41cf03bf2b1c8c14.iso

Does anyone else have this problem or is it just me?

[Greeshma21]

Hi @Mr_S1 

Please ensure that you have selected the latest version of the firmware/driver, click the Revision History tab to check if a new version of the firmware/driver is available. For more important information, review the Release Notes tab.

Try with this the latest version Online ROM Flash Component for Linux - HPE Integrated Lights-Out 5

Regards,
Greeshma

[pirx]

@Greeshma21   your comment is nonsens. OP wrote that he wants to import latest SPP and this fails.

@Mr_S1 I can confirm this, downloaded SPP ISO checksum matches SHA256 on webpage. Gen11 SPP could be imported, Gen10 import failes with:

Unable to validate the signature for the following components contained with the firmware baseline P81139_001_gen10spp-2025_01_00_00-SPP2025010000_2025_0119_14.iso. The component does not have a valid HPE signature.
Online ROM Flash Component for Linux - HPE Integrated Lights-Out 5

Another untested release. I simply don't understand why there is 0 quality managemnt and basic checks.

[MarioE · Accepted solution]

Hello @Mr_S1 

Today I have import the two new SPP
P81139_001_gen10spp-2025.01.00.00-SPP2025010000.2025_0119.14.iso
and
P81140_001_gen11spp-2025.01.00.00-Gen11SPP2025010000.2025_0119.23.iso
into two HPE OneView appliances (version 9.30.00-0502470) without errors.
Which OneView version are you using?

Have you tried restarting the HPE OneView appliance and then trying the import again?

Do you have enough space on the repository?

[pirx]

@Mr_S1 & @MarioE 

I can confirm that Gen10 import worked for me too after updating to OV 9.30. no sucess with 9.20. I didn't see this requirement mentioned anywhere.

[Mr_S1]

Hello @MarioE 

I have tried the import in version 9.20.
Update to 9.30 is currently in progress.

[TKop]

My understanding is the new (and later) SPPs require OV 9.3 and later.  See this related advisory for details on how to workaround for older versions of OV: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00144567en_us.  The advisory is for an SSP and should apply for SPPs too - have not tried workaround myself (advisory to be updated I believe).  

[_TaZ_]

Thanks for this info. 

Updated OneView from 9.20 -> 9.30 (Took 25 min)

I also had to delete the 2025.01 SPP and upload it again for the warning to disappear. 

After that everything worked fine. 

I did not see any information about this either.. 

[RenjuCR]

The CA will be updated to include both SPP and SSP.

[Mimault Philippe]

Hello

Ok but for C7000, the last Oneview is 6.60.07

There's the same error as in 9.20. Is there a workaround?

[Mimault Philippe]

Alternatively, if you have OneView prior to 9.30, you can update the HPE GPG public key in Oneview.
You can download it here:

https://downloads.linux.hpe.com/SDR/hpePublicKey2048_key2.pub

You can install with GUI or curl.