HPE OneView Support for C7000 chassis

[CadenLange]

Hi 

I'm looking for confirmation that I can run HPE OnevIew 6.5 with the following devices:

• C7000 G3 with 12 x BL460c Gen 9
• BL480c Gen9 iLO version 2.61
• 2 x HPE Flexfabric 20/40 F8
• Virtual connect version 4.63
• Onboard Administrator version 4.85
• All the blade servers are running with SPP version 2018.11.0

The current version of OneView that manages this chassis is 4.10.04 and I just want to upgrade OneView only without first upgrading any of the above firmware versions. Is tthere anything in the above list that isn't support with OneView 6.5 or any other firmware versions I need to check??

many thanks in advance

CL

[support_s · Accepted solution]

System recommended content:

1. HPE OneView 6.5 Support Matrix

2. Remote Support Enablement in HPE OneView Frequently Asked Questions

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

Thank you for being a HPE community member.

[CadenLange]

OK - so looking at the support matrix I think I've ticked off all the compatibility concerns I had as I can see OneView 6.5 supports C7000 G3 enclosures, BL460c Gen 9 servers,  works with a minimum VC version of 4.63 for managing and a minimum OA version of 4.31, a minimum iLO of 2.03 for Gen 9 servers. I also checked the minimum ESXi SUT version and that too us at a lower version than I'm running.

So, unless I'm missing something or mis-understanding the content of the support matrix then I'll have no issue with upgrading my OneView appliance to the latest version (6.5) without first having to upgrade any of the C7000 blade environment