HPE OneView Synergy Simulator

[ABOUBAKAR]

Hi all. I am HPE Partner. I am looking for last version of HPE OneView Simulator. Someone can help please?

[AmRa]

Hi

Click on the below link and login with your passport login credentials to download HPE OneView Synergy Simulator

https://myenterpriselicense.hpe.com/cwp-ui/product-details/OVDCS-OSP/-/sw_osp

The HPE OneView demonstration appliance provides the latest version of HPE OneView software, along with a simulation of HPE BladeSystem c-class/DL servers or HPE Synergy infrastructure.

Important notice: HPE OneView demonstration appliance is for internal and channel partner use only. 

[ABOUBAKAR]

HI AmRa,

I downloaded a HPE_DCS_V5.20_OSS_HPE_DCS-5.20.00-OSS.tar file to test simulator but there is no. What file do you want I download?

[AmRa]

Please download any one of the below file based on your base operating system.

HPE_OneView_DCS_7.20_Synergy_ESXi_Z7550-97432.ova                           --VMware
HPE_OneView_DCS_7.20_Synergy_Hyper_V_Z7550-97433.zip                      --Windows

[Kumar8]

I am unable to find the HP syngergy oneview simulator.HPE_OneView_DCS_7.20_Synergy_ESXi_Z7550-97432.ova

can someone help

[bahamrz]

Hello @Kumar8  

i'm facing the same issue did you find a solution to this? i can only find a .tar file which when uncompressed there is no ova file inside!!

[AmRa]

We would suggest please raise a support ticket with HPE tech support for further assistance.

So that we can take remote session and assist you further.

[Masghar]

did you guys get a solution ?

[bahamrz]

Hi Masghar,
Yes, it appeared that i was downloading DCS From myenterpriselicense portal while i should’ve downloaded it from ESM through hpe PRP.

BahaEddin from Mobile.

[Masghar]

Thanks for reply. I am at partner ready portal. what ESM stands for? please guide. 

[bahamrz]

*ESSM
search in the tools you’ll find it.

BahaEddin from Mobile.

[Zesmo2020]

Hello Team,

The only one HPE OneView DCS available on Sofware depot is for Open Source (not able to deploy it on VMware vSphere ESXi).

I've contacted (opened a case) HPE Support and HPE Mylicensing, they are not able to give me answer.

I'm working for HPE Partner, i don't know why i do not diserve an answer.

Very frustrated !!!

Who have downloaded the HPE OneView DCS .ova previoulsy ?

Awaiting for your feedback guys.

[Masghar]

ESSM is the partner tool on partner portal, you should be requesting for access to.

once you are able to download the right appliance, it shall deploy in vmware.  

[Sunitha_Mod]

Hello @Zesmo2020,

We regret any inconvenience you may have encountered. We request you please take a moment to reply to the private message we've sent and provide the requested information. This will enable us to address your concerns with the relevant team.

Also, follow the instructions shared by @Masghar, we hope it helps.

[RBustillos]

Try with this link:

My HPE Software Center | Z7550-63486

[gp33]

Hello @Sunitha_Mod 

I am having the same trouble as Zesmo2020. I am looking for the HPE OneView DCS .ova file. Could you please assist?

Thanks.

[Sunitha_Mod]

Hello @gp33,

Thank you for writing to us! If your inquiry pertains to a technical problem, we recommend initiating a new discussion through the "New Discussion" button. This not only increases visibility over the previous topic but also improves the likelihood of garnering responses from experts. Alternatively, you can reach out the HPE Support directly using the links below.

https://www.hpe.com/psnow/doc/A00039121ENW

https://support.hpe.com/hpesc/public/docDisplay?docId=cep-help_en_us&page=index.html

[Zesmo2020]

Thank you for the link shared.

I've downloaded and deploted it.

[Mkadoura]

is there a link to explain the setup of the .tar file?

[Mr_Techie]

@Mkadoura

You can refer to the https://support.hpe.com/hpesc/public/docDisplay?docId=sd00005777en_us&page=GUID-D7147C7F-2016-0901-066E-0000000008C6.html&docLocale=en_US

[Mkadoura]

I need a link to provide more details on installing from the .tar file that includes all the compressed files, .jar, .ja, .rpm and .nupkg

[Mr_Techie]

Please refer the below links:

How to install .tar files - This guide provides general instructions on extracting and installing  .tar files

How to install a .jar file - This resource explains how to extract and install .jar files  from a .tar archive

Packaging a single JAR file as an RPM properly - This Stack Overflow thread discusses how to package and install .jar files as .rpm

Extracting Nupkg files using command line - This thread provides details on extracting .nupkg files using command-line tools