Why vLCM does not work with HPEoneview

[baber2]

I have installed latest ov4vc and hpeoneview and using vsphere 7.0.2 now. My cluster contains 3 HPE DL580 G10.  I want just apply ILO5 firmware that reside in the cluster for all hosts so I did follow steps :

At the first step I had to create custom image and add latest ILO5 firmware to it. So

run hpsum.bat file from SPP dvd and it runs SUM 8.8 . As I wanted just apply latest ILO5 firmware just select os= vmware vsphere7 , server model = DL580 G10 and component = software - recommendation and make it boot .

After create custom iso I upload it in the oneview and also upload latest ILO firmware ilo5_263.fwpkg and finally create custom baseline with add hotfix to isofile . but now this iso file does not work in vLCM and show this error :

A general system error occurred: Cannot find hardware support package from depot or hardware support manager.

[feigenL]

take a look at this thread, they posted some good ideas about the issue

https://community.hpe.com/t5/HPE-OneView/Does-OneView-and-VLCM-actually-work/td-p/7157308

[ChrisLynch]

Unfortunately, the OneView vLCM provider does not support custom baselines today.  When SUM creates the custom baseline, it does not modify the internal required metadata that vLCM uses, nor does it include that content today.  So, you will either need to:

• Wait for an SPP to be released that supports the iLO firmware version you intend to install.
• Use Smart Update Manager (SUM) remotely to deploy the firmware to the target iLO's.
• Script the installation.
• Create the custom baseline and use OneView to deploy it natively.

[baber1]

1- Is that your mean vLCM just can apply SPP that released by HPE while using HPE oneview?

2- Is that your mean I cannot update only ILO5 firmwares with vLCM when using HPEone view ?

3- Can ILO amplifier help to apply custom baseline on ESXi hosts (HPE servers) 

I want just apply ILO5 firmware for all hosts and later just apply HPE BIOS update 

[ChrisLynch]

1- Is that your mean vLCM just can apply SPP that released by HPE while using HPE oneview?

This isn't a restriction by OneView, rather vLCM requirements from vendors.

2- Is that your mean I cannot update only ILO5 firmwares with vLCM when using HPEone view ?

By the very nature of the requirements, yes. The same restrictions would exist for iLO Amp.

3- Can ILO amplifier help to apply custom baseline on ESXi hosts (HPE servers) 

No, as the same restrictions would apply.

I want just apply ILO5 firmware for all hosts and later just apply HPE BIOS update 

This really isn't the best practice for firmware management.  Rather, the entire server update should be applied.  While there are reasons to update iLO firmware (e.g. security vulnerability, bug fix, etc.), baselines are meant to be used by customers as a tested recipe in order to install the latest needed features and bug fixes.

[baber1]

1- Is that your means this restriction relate to VMware ?

2- Did HPE report it to VMware for solve ?

3- Most of time SPP will release every 3-4 months but between this period HPE release updates for ILO and Bios . So we have to wait and apply updates every 3 months.

4- Is that possible apply cutom baseline on all hosts via HPEoneview ? For example I want update just ILO firmware for 10 HPE servers is that possible just apply ILO5 firmware ?

[ChrisLynch]

As I stated, we do not support custom SPP's when deploying that from vLCM.  This isn't a VMware problem to solve.  If you simply need to deploy just iLO firmware, please use one of the other methods provided.  We do not recommend simply deploying iLO firmware by itself (the same is true of any other component), as you spend more time just deploying individual component rather than updating the entire server to a current SPP.

Individual components are provided to immediately address specific situations, like security vulnerabilities.  We do not discourage customers from deploying individual components for those reasons.  However, routine system maintenance should really be treated as a whole solution, rather than individual components, as to reduce the overhead of maintaining them individually.

[baber1]

But Imagine for security reason we have to do ILO5 firmware or BIOS update . What is the solution here to apply for more yhan 10 HPE servers ?

[ChrisLynch]

I provided those options above.

• Wait for an SPP to be released that supports the iLO firmware version you intend to install.
• Use Smart Update Manager (SUM) remotely to deploy the firmware to the target iLO's.
• Script the installation.
• Create the custom baseline and use OneView to deploy it natively.

[baber1]

I prefer use last solution for update ILO5 firmware on all HPE servers with ESXi and apply by oneview . I read that doc to create custom base line :

1-  select baseline and then just select recommend updates and components type = software
(Actually I just want to create a custom SPP with minimum size and then add the latest ILO5- firmware to it .I don't want to download latest SPP . I want create just a baseline with minimum size)
2- select x86 , x64 , operating system= VMware vsphere 7.0 and server model = DL580 G10
and click on create custom ISO baseline

3- Finally update this custom ISO baseline and latest ILO5 firmware (ilo5_263.fwpkg) in hpeoneview and create custom baseline here ?

Are my above steps correct ?

[baber1]

Would you please help me about it ?

[baber1]

When I do remediate while select latest HPE SPP it show follow error :

Hardware update action: 'POST_IMAGE_UPDATE' for host 'host32' 'FAILED' on HSM 'HPE OneView for VMware vCenter' although HPEonevew , oneview4vcenter and vcsa and esxi hosts all of them are in the same subnet and there is not any firewall or restriction between them but SPP cann not deploy on esxi hosts

[mansonJ]

@baber1 , issue resolved for you

[baber1]

Unfortunately . No

[ChrisLynch]

Are you using a Custom SPP or Full SPP?  If Custom, did you create it on the Custom SPP Portal?  Can you please provide what versions of OneView, SPP, OneView for vCenter and vSphere you are using?

[baber1]

vCenter version = 7.0.2

Esxi verison = 7.0.2 17867351

oneview version = 6.60

oneview 4 vCneter verison= 11.0.0

At the first step I want to apply Gen10 service pack for proliant 2021.10.0 

When select host2 and click run precheck show follow :

1 issue on host host2.opr.dsa

•  

Host 'host2.opr.dsa' is incompatible with the image. Please check compliance information for more details.

And when I select host1 and select remediate it will do some operation on it and reboot esxi host but finally not apply SPP on it because there is not any change in Firmware and Bios version